Lift and slide doors are a great way to give a sleek and modern feel to your home.
They provide a seamless indoor-outdoor living space with clear, unobstructed views and plenty of natural light. The doors are also safe, easy to operate, and often include slide lockers for both the top and bottom of the door. Below is a helpful guide for understanding how these doors are installed:
Step 1: Take Measurements
The first step is to determine the right size door for your space. Begin by measuring from the floor to the top corner of your doorway on both sides. This will give you an idea of how wide you need the door to be so that it fits in your doorway.
Read Also: Additional Services Offered by Movers and Packers in Dubai
There are many styles and sizes of doors to choose from. These measurements can help you choose the best fit for you.
Step 2: Prepare for Installation
Remove the old door from the doorway to create more space to work. Any pictures or items hanging from the walls can also be temporarily removed. This will keep them safe during the installation process.
Before installing the door, add flashing to the door jamb and cabinet side of the frame so there is a tight fit. Cut a piece of flashing to the same width as your door casing along the bottom sill of your door frame as well. Then attach the flashing to the casing and frame with a stapler or nail gun.
Step 3: Install the Door
These doors can weigh between 550 and 800 pounds, you may need assistance with this step of the installation. One person should hold where the top part of the frame meets the wall for support. A second person should lift and push against the bottom of the door. A third person can watch carefully to prevent bumps or scratches as you push the door into position.
Make sure your door sits perfectly upright and level by placing a spirit level on your door sill. Check both sides and adjust accordingly. This will be a delicate operation, so you may want to install nails around the frame to hold it in place.
Step 4: Remove Protective Lining
Now that your door is in position, you can start sealing up the sides. Use a waterproof sealant around the edge of your door frame. This way, no water will seep into the space and damage wooden surfaces.
Once everything is sealed up and straight, you can remove the protective tape or coverings surrounding the door. Then install any door handles or other hardware and enjoy your new doors.
Professionally Installing Lift and Slide Doors
Installing new lift and slide doors in your home can be challenging. If you want to make sure the process is done right, you can also hire experts to perform the installation. Experienced installers make the process quick and provide you with the assurance that your door has been installed safely and correctly.
Reach out to expert installers today and find out how they can assist you.
